Coming Soon — Ventilated Battens will be available in BlueScope Steel
Fascia and Ridge Install Demonstration
Player not loading? Watch on YouTube
Available in 6 metre lengths
We're extending the range with 6 m ventilated battens, giving installers longer continuous runs with fewer joints and quicker set-out on large roof and wall areas.
Register your interest6 metre lengths
Continuous runs in one piece, no repeated short joins.
Fewer joins
Less cutting, less waste and a cleaner finished line.
Faster install
Fewer lifts and fixings across long roof and wall runs.
Roof Ventilation Requirements by Pitch
Minimum ventilation area required for roof spaces, based on roof pitch.
| Roof Pitch | Minimum Ventilation Required |
|---|---|
| < 10° | 25,000 mm²/m provided at each of two opposing ends |
| ≥ 10° and < 15° | 25,000 mm²/m provided at the eaves and 5,000 mm²/m at high level |
| ≥ 15° and < 75° | 7,000 mm²/m provided at the eaves and 5,000 mm²/m at high level, plus an additional 18,000 mm²/m at the eaves if the roof has a cathedral ceiling |
Paton Ventilated Battens Cover All Roof Pitches
Delivering 25,000 mm² per linear metre, our battens meet the minimum ventilation requirement at every pitch — no guesswork, just a compliant batten every time.
The True Cost of Roof Ventilation
A simple comparison of common roof ventilation batten systems.
Example Scenario: 100m of Battens on a Standard Pitched Roof
| Comparison | Paton Steel Ventilated Battens | Timber Cavity Battens | Traditional Timber Counter Battens |
|---|---|---|---|
| Material cost / m² | $11.50 | $21.40 | $11.00 |
| Install labour cost | Low | Low–Moderate* | Higher* |
| Cutting & assembly | Minimal | Moderate | Additional blocking and fixing |
| Ventilation | 25,000 mm²/m | 5,000 mm²/m | Design dependent |
| Roof pitch | All roof pitches (0–75°) | Ridge ventilation above 10° | Design dependent |
| Fire rating | Up to BAL-FZ | Not rated | Not rated |
| Additional components | Dependent on ABCB requirements | Dependent on ABCB requirements | Dependent on ABCB requirements |
| Total installed cost / m² | $18.90 | $29.80 | $29.95 |
*Indicative installation complexity only. Compare equivalent roof designs and compliant installations.
Less cutting. Less fixing. Less labour.
One integrated steel batten designed to provide structural support and continuous roof ventilation.
Download Cost Comparison (PDF)NCC 2025 Condensation Management
For roof condensation management under NCC 2025, the minimum clear ventilation gap is 18 mm, where the roof ventilation provisions apply in climate zones 6–8.
Important: Traditional solid roll-formed galvanised steel battens do not meet the new NCC requirements.
Engineering Certification
This product meets the requirements of AS/NZS 4600 for spans up to 1200mm

Engineered for Performance
Our Ventilated Battens provide a smarter, safer, and more efficient approach to roof ventilation and durability.
Optimised Ventilation
Patented design maximises airflow with 25,000mm² ventilation per linear metre, meeting NCC 2025 requirements.
Condensation Control
Triangular openings (34mm × 75mm) promote high airflow, reducing humidity and preventing mould growth.
Superior Strength
Upgraded material gauge and triangulated design deliver excellent compressive strength and wind load performance.
Thermal Performance
Improved ventilation contributes to better energy efficiency and enhanced thermal and acoustic performance.
Modern Compatibility
Designed for modern roof and wall spacing with superior fastener engagement.
Easy Installation
Battens nest for convenient transport and storage. Delivered in strapped bundles of 10 for easy handling.
Two Profiles Available
Choose the right batten for your roofing or wall application

VB350 Wall Batten
Bundle of 10
35mm high ventilated batten designed specifically for walls.
$297.00
+GST per bundle

VB500 Roofing Batten
Bundle of 10
50mm high ventilated batten designed specifically for roofs.
$334.60
+GST per bundle

Paton Industries
With over 55 years of experience, Paton Industries is a trusted name in Australian manufacturing. Known for our commitment to design excellence, durability and performance in livestock equipment, we are now extending this expertise into the construction industry.
Our ventilated battens are designed and manufactured right here in Victoria, Australia, ensuring the highest quality standards and supporting local industry.
55+
Years Experience
VIC
Australian Made
100%
Quality Assured

